您当前的位置:首页>服务范围 > 检测咨询 > 材料综合性能检测

地板地坪测试

MOB PF2 PS/SPU-1992: 架空地板-性能规定 Platform floors (raised access floors) - performance specification

MOB PF2 PS/SPU-1992: 架空地板-性能规定 Platform floors (raised access floors) - performance specification

T 1.00 凹度或凸度 Concavity or convexity
T 2.00 扭曲 Twist
T 3.00 板的方度 Panel squareness
T 4.00 板边沿衬条拉拔强度(仅适用有衬条的板) Pull off strength of edge strip
T 5.00 支架自由度测试 Test for free play in pedestal
T 6.00 空气渗透速率 Air leakage rate
T 7.00 300×300mm负载测试(仅适用轻,中承重等级)300mm Square Loading Test(applies to Light&Medium Grades only)
T 8.00 25×25mm点载荷测试 25mm Squareness Point Loading Test 
T 8a.00 25×25mm切边点载荷测试 25mm Squareness Point Loading Test on Perimeter Cut Panel Edge
T 9.00 四点承载测试(只适用于超重级)Four Point Loading Test(applies to Extra Heavy Grades only) 
T 10.00 均布载荷测试 Uniformly Distributed Load Test
T 11.00 安全因素载荷测试  Safety Factor Load Tests
T 12.00 软体冲击测试 Soft Body Impact Test
T 13.00 硬体冲击测试 Hard Body Impact Test
T 14.00 支架动态载荷 Pedestrian dynamic load test
T 15.00 支架强度-水平负载 Pedestal Strength – Horizontal Load
T 16.00 支架强度-垂直负载 Pedestal Strength – Vertical Load
T 17.00 温度影响 Effect of temperature
T 18.00 湿度影响 Effect of humidity
T 19.00 表面火焰传播测试及性能指数 Determination of Surface spread of flame and index of performance
T 20.00 小型火测试 Small Scale Fire Test
T 20a.00 热学性能 Thermal properties

CISCA 架空地板-性能规定 Recommended test procedures for access floors 

集中载荷测试 Concentrated loads 
极限载荷测试 Ultimate loading
滚动载荷测试 Rolling Loads
横梁载荷测试 Stringer Load testing
支架轴向载荷 Pedestal Axial load test
支架倾覆力矩 Pedestal overturning moment test

BS EN 12825:2001 高架通道地板 Raised access floors 

承载测试 Load test on element
支架垂直载荷 Pedestal vertical load test
变形测试 Permanent deformation test on element
硬体冲击 Hard body impact test
软体冲击 Soft body impact test
板长 Length of panel sides
板方度 Squareness of panel
板边直度 Straightness of sides horizontally
板厚 Thickness of panel
板扭曲 Panel twist
板垂直翘曲 Vertical warping of panels
板衬边距板面高度差 Difference in height from perimeter trims to panel surface
抗剥离 Peel resistance

复合地板 Laminate floor coverings 

EN 13329:2000 复合地板-规范、要求以及测试方法 Laminate floor coverings - Specifications, requirements and test methods 

一般要求 General requirements
Thickness of the element单体厚度
Length of the surface layer表面层长度
Width of the surface layer表面层宽度
Length and width of squared elements整体长度及宽度
Squareness of the element单体的直角度
Straightness of the surface layer表面层的边直度
Flatness of the element单体的平整度
Openings between elements单体之间的拼缝
Height difference between elements单体之间的高度差
Dimensional variations after changes in relative humidity相对湿度下的尺寸变化
Light fastness耐光性
Static indentation静载下的压痕
Surface soundness表面稳定性
Classification requirements等级要求 
Abrasion耐磨性
Impact resistance抗冲击性
Resistance to staining耐污染性
Resistance to cigarette burns抗香烟燃烧
Effect of furniture leg家具脚的影响
Effect of a castor chair椅子脚轮的影响
Thickness swelling浸水厚度膨胀
Additional requirements附件要求 
Humidity at dispatch from the manufacturer含水量
Appearance, surface defects表观检查
Marking标记

EN 14342:2005 木地板-特性,符合性评估以及商标 Wood flooring - Characteristics, evaluation of conformity and marking

Biological durability抗生物侵袭危害
Reaction to fire防火性
Release of formaldehyde甲醛释放量
Content of pentachlorophenol (PCP)五氯苯酚含量
Breaking strength破坏强度
Slipperiness防滑性
Thermal conductivity导热性
Marking商标

GB/T 20240-2006 竹地板 Bamboo flooring 

Length表面长度
Width表面宽度
Thickness厚度
Squareness垂直度
Edge straightness边缘直度
Warpage翘曲度
Gap拼装高差和离缝
Surface quality外观质量检查
Moisture content含水率
Resistance to peeling浸渍剥离
Bending静曲强度
Abrasion表面漆膜耐磨性
resistance to stain表面漆膜耐污染性
Adhesion表面漆膜附着力 
resistance to impact表面抗冲击性能
Release of formaldehyde甲醛释放量

EN 649: 1996   A1:2003 弹性地板层—均质和非均质聚氯乙稀地板层—规范 Resilient floor coverings - Homogeneous and heterogeneous polyvinyl chloride floor coverings - Specification 

Tiles: side length, squareness and straightness for side length片状:边长,直角度以及直线度的测定
Overall thickness整体厚度的确定 
Total mass per unit area单位面积里的质量
Density for homogeneous and wear layer of heterogeneous均质及非均质研磨层的密度测定
Residual indentation残留压痕的测定
Dimensional stability after exure to heat加热后的尺寸稳定性
Curling after exure to heat加热后的卷曲变形
Flexibility柔韧性的测定
Colour fastness to artificial light人造光色牢度测试
Marking标记

弹性地板层的个别测试 Individual Test of Resilient Floor Coverings 

Resilient floor coverings — Determination of the resistance to staining弹性地板层—抗污性能的测定
Resilient floor coverings — Determination of the effect of simulated movement of a furniture leg弹性地板层—家具腿模拟移动耐磨效应的测定 
Resilient floor coverings — Determination of the effect of a castor chair弹性地板层—椅子脚轮的影响
Resilient floor coverings — Determination of the side length, squareness and straightness of tiles弹性地板层—边长,地板直角度以及直线度
Resilient floor coverings — Determination of overall thickness弹性地板层—整体厚度的确定
Resilient floor coverings — Determination of the thickness of layers弹性地板层—层厚度的确定
Resilient floor coverings — Determination of mass per unit area弹性地板层—单位面积内的质量
Resilient floor coverings — Determination of peel strength弹性地板层—耐剥落性能确定
Resilient floor coverings — Determination of shear force弹性地板层—切变应力测定
Resilient floor coverings — Determination of residual indentation after static loading弹性地板层—静载负荷后的残留压痕
Resilient floor coverings — Determination of dimensional stability and curling after exure to heat弹性地板层—加热后尺寸稳定性及卷曲变形
Resilient floor coverings — Determination of flexibility弹性地板层—柔韧性测定
Resilient floor coverings — Determination of density弹性地板层—密度的测定
Resilient floor coverings — Determination of wear resistance弹性地板层—抗磨损性的测试

PVC 地板的附加测试项目(推荐)Addition Test for PVC Flooring (suggestion) 

Colour fastness to artificial light: Xenon arc fading lamp test 耐人造光色牢度:氙弧灯试验
Heavy metal 重金属含量
PCP五氯酚PCP五氯酚
Formaldehyde emission 甲醛释放量
Surface resistivity 表面电阻率
Volume resistivity 体积电阻率
Thermal conductivity 导热性

ASTM F1700-99 硬质乙烯地板的标准规范 Standard Specification for Solid Vinyl Floor Tile 

Physical Properties物理性质
Binder Content粘合剂含量
Size尺寸
Thickness厚度
Squareness直角度
Indentation压痕
Flexibility柔性
Dimension stability尺寸稳定性
Resistance to chemicals耐化学腐蚀
Resistance to heat抗热性 
Resistance to Light耐光性
Workmanship, finish and appearance工艺以及外观

ASTM F1066-04 乙烯地板的标准规范 Standard Specification for Vinyl Comition Floor Tile 

Physical Properties物理性质
Size尺寸
Thickness厚度
Squareness直角度
Mechanical Properties机械性能
Indentation压痕
Impact冲击
Performance Requirements操作要求
Deflection变形
Dimension stability尺寸稳定性
Resistance to chemicals耐化学腐蚀
Resistance to heat抗热性 
Workmanship, finish and appearance工艺以及外观

EPOXY 环氧树脂地坪

Compressive strength抗压强度
Flexural strength弯曲强度
Modulus of elasticity弯曲强度系数
Tensile strength抗拉强度
IZOD impact resistance冲击强度
Abrasion resistance耐磨性
Bonding strength黏结强度
Resistance of chemical reagents耐化学药品
Surface resistivity表面电阻值
Fiber content固体含量
(此内容由www.motentesting.com提供)